No hot water to showers
Got combi boiler working fine, get hot water to sinks but not to the showers any ideas?
Advice from 15 local tradespeople
Hello , That seems to be an issue with the tap not turning to hot water or might be the connections
but just need to know you had that issue for long time , or it's happened just now
if you would like i offer you Free visit won't cost you anything to see what going on exactly
Regards,,,,
Could be numerous faults. Most common is either blockage or airlock in the pipelines
Filters been checked on the showers?
If the mixer is over 3 years old it may need replaced, especially if it's a budget one
Possible low pressure or limescale build up in shower head.
There could a number of faults. Most common is either blockage or airlock in the pipelines.
Either pipework is crossed to shower unit or thermostat is faulty or preassure issue...
maby there is a valve off or its a plumbing mistake
Mixer in shower fulty
could be piped wrong, are there any isolation valves shut off going to showers, are the showers new and or suitable for a combi
Possibly isolation values shut off on hot water feed to showers
First floor showers will need to have a pump if hot water flow rate is low.
Gravity is the cause
Get a plumber to look into it, probably the pump is gone.
Main reasons;
1) Not connected to water system
2) Have they got isolators and if so are they open
3) Shower Valves Faulty
4) Shower Filters Blocked
5) Insufficient water pressure
