Freestanding bath taps won’t fit 3/4 inch connector
Freestanding bath taps won’t fit 3/4 inch connector. Bought second hand.
3/4 inch is too big think screw thread is 22mm.
I’m no plumber so really need advice.
Am I missing a part I.e. nuts olives I really don’t know what to do
Advice from 2 local tradespeople
Take the taps to B&Q and ask for reduction connector. The staff in the plumbing section will be ableto point you in the right direction.
this must be a 22mm thread so you will need a 22mm but and olive then you can insert a short piece of 22mm pipe and then you are free to come off that with a fitting of choice I.e john guest or end feed. regards Steve
