How much to re-bed area of paving stones?
An area (about 1 x 2m) of our driveway paving is loose and getting worse I think. Could someone let me know what price (rough) I'd be looking at to re-bed the stones securely?
Advice from 13 local tradespeople
1 fixed price at £150-£200 depending on location per bloke x2 men on the job, 1 days work, pick up blocks give them all a good clean to remove any mud build up that has built up over time, prep and compact for a relay with a possibility of replacing a few cuts and brushing in some sand and compacting it back to how it should be :)
In answer to your question, what type of stones are you referring too and I presume you are driving over the area in question with a vehicle?
£250
Hi not looking at the job could be ,anywhere from £200-400 depending on wat materials are needed and wat work needs doing to make it secure , hope that helps
250 pound, as it is not a big job would just need to lift up the lose Blocks and reply sand cement mix relay BLOCK. pressure plate full drive after applying kilne sand . be like new
About £200 to do 1x2m
I would price this up at around £150 /250 depending on materials and time ,but without a proper look to see what's involved this is a rough estimate
Tou nees to lift existing see what is underneath if its not at least 300mm stone compressed then you need to sort that
Hi, as its a small area I reckon a contractor would charge a shift rate instead of a price per m2, probably be looking at £250-300.
To lift and relay 2sqm approx.
Estimate £250 to £300.
Have you got photo £150
£250
